Only the Best from Hayward Pool Products

Easily installed in existing pools, they control up to 4 products and integrate seamlessly with most brands of equipment. VS Omni variable-speed pumps include a choice of 4 models to provide a simple replacement for your existing pump:

• TriStar® VS 950 Omni
• TriStar® VS 900 Omni
• MaxFlo™ VS 500 Omni
• Super Pump® VS 700 Omni

ment. VS Omni variable-speed pumps include a choice of 4 models to provide a simple replacement for your existing pump:

• TriStar® VS 950 Omni
• TriStar® VS 900 Omni
• MaxFlo™ VS 500 Omni
• Super Pump® VS 700 Omni

the need to backwash. SwimClear filters offer a choice of 225, 325, 425, 525 and 700 sq. ft. of heavy duty dirt holding capacity and extra-long filter cycle.

• Top manifold configuration provides excellent filtration and hydraulic performance for reduced cost of operation
• Cleanable cartridge elements eliminate the requirement for backwashing
• Filter tanks are made from the most durable materials to meet the demands of the toughest applications and environmental conditions
• High capacity, rapid release manual air relief valve bleeds air with a quick quarter turn of the lever
• Heavy-duty, tamper-proof, one piece flange clamp securely fastens tank top and bottom and allows quick access to all internal components

• Standard cupro nickel heat exchanger
• Excellent saltwater and chemical corrosion resistance
• Exclusive “Totally Managed” cupro nickel heat exchanger water flow
• Same water velocity through all tubes for faster heating
• Patented header by-pass design
• Up to 18 percent savings by reducing pump run-time
• 2in x 2 1/2in CPVC union plumbing connections
• Common union for installation or service adapts to larger plumbing recommended for greater efficiencies
• Low NOx emissions – meets clean air quality standards

HeatPro features the industry’s only standard Ultra Gold corrosion resistant evaporator fin which provides extreme durability, especially in coastal environments. Its compact design allows for easy installation and service on new or existing pools.

• Titanium Heat Exchanger – excellent saltwater and chemical corrosion resistance
• Exclusive ‘Ultra Gold’ evaporator coil corrosion resistant especially in coastal areas
• Quiet operation – quiet backyard environment
• AHRI certified performance – independent lab certified performance ensures the value of the purchase
• 2in x 2 1/2in CPVC union plumbing connections – the common union for installation or service, adapts to larger plumbing recommended for greater efficiencies
• Lightweight – less than 250 lbs.

With the introduction of AquaRite 900, we’re taking our industry-leading technology to the next level. AquaRite 900 is designed to provide the same superior salt chlorination you expect from Hayward, but with an Extended Life TurboCell, it produces 25% more chlorine over its lifetime than our leading AquaRite systems. The Extended Life TurboCell cuts your chlorine costs by 50% or more, to less than $1 per pound. Plus, with an industry best 4-year warranty, you can relax in the comfort of your pool completely worry-free.

in reliability and efficiency. TigerShark® makes sure virtually every area of your pool gets that much cleaner, and fast! The TigerShark® QC automatic robotic cleaner is no exception with a fast 90-minute Quick Clean cycle.

Efficient cleaning programs

• All TigerShark models come with a standard 3-hour complete cleaning cycle for full floor, walls, coves, and waterline.
• Patented Quick Clean technology (TigerShark QC model) provides a fast 90-minute cycle.

Powerful vacuum strength

• On-board pump for intense vacuum power to suck up dirt and debris.
• Built with an efficient 24-volt motor designed to use less energy and lower cost.

Unique cartridge filter system

• Makes emptying easy, just open the cleaner, remove the cartridge and rinse with a hose. Easy to use
• No extra hoses, hookups, or pumps required.
• Runs separately from the pool’s filtration system reducing the frequency of filter backwash cycles.

UL-listed lights to retrofit virtually any existing pool and spa with vibrant color – even those with just one light. 100% brighter than any on the market, these energy-efficient lights deliver spectacular color to pools with a single incandescent light or pools with colored finishes, and breakthrough cost savings and installation versatility for new pools, spas, and fountains. All-plastic, low-voltage design, combined with all-plastic Thin Niche eliminates the need for bonding, grounding, and GFCI. Thin Niche also reduces the cost for dig, steel, and gunite because it is only 2.75in front-to-back and mounts to the face of the rebar grid. Pool and spa lights are UL listed for wall or floor installs without a rock guard and can be positioned just 4in from lens to water level – perfect for steps, beach entries, and fountains.

• UL listed for installation in virtually any pool or spa niche
• 100% brighter* than any color LED light on the market
• Use up to 86% less energy than incandescent lights and last 10x longer
• Breathtaking 10 fixed colors and seven color-changing shows
• Can be installed in a little as 4in below the waterline, and on the wall or the floor without a rock guard
• 12V, 2-wire, all-plastic design with no exposed metal and an unbreakable lens requires no bond, no ground, and no GFCI for safe installation
• Programmable to match ColorLogic or Pentair® SAm® light shows
• 30, 50 and 100′ models available
• Available in a switch sync, stand-alone versions or a network version that integrates with Pro Logic
• UCL Thin Niche provides incredible installation savings for new construction
• Retrofit transformer kits available for easy high-to-low-voltage J-Box conversion
• 300-watt transformer available for multi-light installations
• Ships with smooth white and silver luster starburst trim rings. Additional rings are also available in faux chrome, black, blue, beige, gray and white starburst

from the industry’s most intuitive app and effortless upgrades to always keep your backyard on the cutting edge.

With OmniLogic, you can expect to:

Eliminate complexity. With the most intuitive, icon-based user interface on the market right on the base unit, set your controller to fit YOUR needs and preferences quickly and easily. Setting up familiar names for pool and spa features, as well as other automated activities eliminates guessing games.

Customize to fit your lifestyle. Adjustable Favorites buttons allow you to set the features you use the most at your fingertips. And with dramatically expanded backyard themes, each family member has the ability to personalize themes for custom ambiance.

Minimize Maintenance. Designed to be salt-ready, and compatible with Sense & Dispense, let OmniLogic keep your chemicals perfectly balanced. Easily set schedules and maximize energy efficiency for cleaning and filtration processes.

Easily Expand. Thinking about adding a water feature? Possibly more landscape lighting? OmniLogic can accommodate you. With simple expansion hardware, it’s easy and cost-effective to seamlessly add features from heaters to pumps to lighting.

Stay Cutting Edge. OmniLogic is designed and engineered to advance with automation technology. The system’s unique architecture allows for effortless access to the latest software upgrades, new capabilities, or even restoration of previous configurations.

Conveniently control your world. Seamlessly access your backyard via apps for iPhone, iPad, and Android devices, wireless and wired remotes, or the base unit itself depending on where you are or what you’re doing. OmniLogic also has the ability to integrate with select home automation systems.

Choose the best in backyard control with OmniLogic.